Ir al contenido de la página

Gotoh RG15/RG30 String retainer C

83 Valoraciones de los clientes

4.7 / 5

Fabricación

Gotoh RG15/RG30 String retainer C
4,77 €
Todos los precios incluyen IVA
En stock
1

59 Reseñas

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
R
Better than anticipated
R-Bo 26.11.2020
I was expecting them to work, but I was surprised at the improvement in tuning stability. I was really able to give the tremolo bar an absurd amount of abuse and the strings were perfectly in tune. Small investment, big payoff. Easy to install if you have existing holes. Drilling a new hole is not particularly difficult, but drilling into a clean headstock requires a threshold of confidence.
Fabricación
2
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
C
Think First Before You Start
ChrisF62 31.12.2025
I feel so sorry for the people who left reviews saying the screws broke off in their headstock. There's no mandate to screw the tree tightly down onto the bushing. Be aware that if you're replacing a tree installed by Fender, their screw hole may be off-center. Then what are you going to do? Even though I got mine installed without incident, I still hear that tinkling sound, just like the OEM tree that came with the guitar. If I had to comment on improved tuning stability it would be positive. My guitar is setup perfectly and typically stays in tune. When I checked the tuning this morning it was only off by a few cents. Aggressive use of the vibrato has little effect on tuning. Overall, these trees do what they're supposed to do, which is to keep the strings in their nut slot. The most significant improvement is in appearance. They look far better than stock.
Fabricación
1
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
A
good
Alex<randomInteger> 09.01.2022
just a small observation - it's also possible to stack two cylinders to make one tall string tree. On my guitar (G&L ASAT) the normal height sting tree seemed too short, while the stacked tree was just right.
Fabricación
1
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
B
Why Pay More For "F" Branded Ones?
BillDL 21.08.2020
These are perfect for upgrading the cheap traditional wing retainers on "S-Style" guitars with vibrato/tremolo bars to reduce the friction. They are not actual rollers, as are some of the more expensive ones, but they are smooth and rounded enough where it should not make any difference. Screws are just the right length.
Fabricación
1
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
m
Good upgrade
mutaatio 26.01.2023
This was a good upgrade to my Harley Benton ST-62. The original string retainers were a bit iffy and scratchy, but this is an inexpensive replacement that is of much better quality and is a drop-in (or rather screw-in) replacement.
Fabricación
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
P
Broken screw
Paul1976 25.05.2026
During installation of string retainers, I had a broken screw. I had to drill the screw out, I think the screws from gotoh are from bad quility.
Fabricación
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
M
Does what it should
Maccallan 22.05.2021
Nice upgrade for the standard Squier string trees
Fabricación
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
F
Just as good as bulky roller stringtrees
Foefmeis 18.05.2021
I swapped these on my '98 USA Strat for the bulky Göldo roller stringtrees. Look more elegant and are so well made that there's no noticeable friction to be detected. Together with a Tusq nut they provide excellent tuning stability on my standard trem. Also put them on my Tele. Be aware that you might have to enlarge the mounting holes in your headstock a little.
Fabricación
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
D
The tuners you want.
Davono 30.06.2022
A1, all good. Excellent machine heads and competitive price
Fabricación
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
b
It's great
bloodmeat 21.09.2025
Bought these to replace the string trees on my Harley Benton ST-Modern (non Plus). Had to drill larger holes, used a 2mm drill bit. These fixed the issue of strings getting caught while tuning or using the trem. You know the annoying "clicking" noise you get? That's gone!

Highly recommended!
Fabricación
0
0
Reportar evaluación

Reportar evaluación

Gotoh RG15/RG30 String retainer C