Ir al contenido de la página

Brazo de sobremesa para micrófono

  • Conexión roscada de 3/8" o 5/8"
  • Sostiene hasta 0,8 Kg
  • Ancho de tramo de 10 a 51 mm
  • Material: Acero
  • Incluye 4 abrazaderas para cable
  • Longitud: 460 - 960 mm
  • Peso: 1,38 Kg
  • Color: Negro
  • Sujeción para mesa disponible (artículo nº158140) no incluida
  • Disponible desde Julio 2020
  • número de artículo 497308
  • Precio por 1 Unidad(es)
  • Tipo Brazo de micrófono
  • Altura (mm) 460 mm – 960 mm
  • Color Negro
58 €
Todos los precios incluyen IVA
En stock
1

71

4.5 / 5

Estabilidad

Fabricación

42 Reseñas

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
D
Noisy and instable
Djangi 06.11.2020
When using a lighter mic (sm57) the springs tend to be too strong. This can be partially solved by tightening the clamps in the joints.
When using a heavier mic (sm7b) the springs are not strong enough, it's almost impossible to retain a 90 degree angle (it usually falls back to 75).
The spring are also very noisy which can affect your recordings.
The mic connector is too close to the joint for use with a SM7B which causes stress on the cable/connector. you can solve this with an extender like the Shure A26X.

Unfortunately I noticed most of the issues after spending quite some time with it, would have returned it otherwise. I'm probably going to replace it with the Rode PSA-1.
4
2
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
A
Solid.
Abdstract 19.08.2022
It does the job, good quality, stable and solid.
Fabricación
Estabilidad
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
s
salik 14.03.2024
Great product, very flexible and very easy to configure.
A recommendation if you need a mic arm.
Fabricación
Estabilidad
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
F
Perfectly Decent, Decently Perfect
FlashTheDeliveryGuy 18.09.2026
As long as you are using the standard spread of dynamic microphones and small condensors you should be fine: however once you graduate to larger and heavier microphones I do find that mine struggles to hold position.
Fabricación
Estabilidad
0
0
Reportar evaluación

Reportar evaluación