Ir al contenido de la página

Pre-Wired Electronics Replacement Kit for T-Style Electric Guitar

  • A kit comprising top-quality components, offering a significant improvement over standard electronics
  • Suitable for 2 single-coil pickups with 1 volume control, 1 tone control and a standard 3-way switch
  • Features a special 4-way switch which, in the fourth position, delivers a rich humbucker sound, whilst the other three positions retain the standard Tele switching functions
  • The treble bleed circuit prevents a loss of treble when the volume control is turned down
  • Switch positions: 1: Bridge, 2: Bridge and neck in parallel, 3: Neck, 4: Bridge and neck in series
  • Manufacturer number: Z457335-4S
  • Made in USA

Set consists of:

  • 2 Mojotone Custom CTS 250k solid-shaft potentiometers (9.5 mm thread length)
  • CRL 4-way switch
  • Switchcraft mono input jack
  • .047uf capacitor
  • Pre-tinned, fabric-covered wire
  • Volume mod (Treble Bleed)

Note: If the neck pickup has only two wires and a cover, a third wire must be isolate and added to the cover for the 4-way modification to work properly. It may also be necessary to lengthen the slot in the control panel so that the switch engages fully in the first and fourth positions.

  • Disponible desde Abril 2026
  • número de artículo 642489
  • Precio por 1 Unidad(es)
  • Construcción Prewired Harness/Wiring Kit
  • Valor de resistencia 250 kOhm
  • Curva característica Logarítmico
  • Longitud del tornillo en mm 9,5 mm
  • Potenciómetro en tándem No
  • Push/Push No
  • Sin soldadura No
  • Tipo de eje Estriado
  • Tipo Conmutador
  • Tipo de repuesto Wiring Kit
106 €
Todos los precios incluyen IVA
En stock
1

1 Valoraciones de los clientes

1 / 5

Fabricación

1 Reseña

google translate de
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
DE
Sehr ärgerlich
D.S. Esbo 27.08.2026
Das Mojotone T 4-Way Prewired Set ist grundsätzlich gut verarbeitet, doch bei meinem Exemplar hat sich erst nach dem Einbau gezeigt, dass der Switch nicht richtig funktionierte – ausgerechnet Stellung 4 funktionierte nicht. Klar, ich hätte natürlich zurücksenden können, das hätte aber zu lange gedauert (ich habe nur diese eine Gitarre). Daher habe ich mir einen neuen 4-Way-Switch besorgt und diesen eingebaut. Etwas ärgerlich, da ich das Set ja gerade gekauft hatte, um ums Löten herumzukommen. Ich gehe aber davon aus, dass es sich um einen Einzelfall gehandelt hat und nicht um ein grundsätzliches Qualitätsproblem. Auf jeden Fall passt jetzt alles.
Fabricación
0
0
Reportar evaluación

Reportar evaluación