Dynacord U60:1M Mixer amplifier

1-Channel Mixing Amplifier

• Output power: 60 W
• Amplifier: Class D
• Inputs: 2x balanced Mic/Line XLR, 2x AUX RCA stereo to mono and 1x EMG priority input
• Phantom power: 48 V, switchable for both mic inputs
• Speaker outputs: 4 ohms, 8 ohms, 70 V, 100 V
• Frequency range from input to output: 70 – 18,000 Hz
• EMG to output frequency range: 80 – 15,000 Hz
• Frequency range from input to line output: <10 – 60,000 Hz
• Total harmonic distortion: <0.5 per cent at rated power and 1 kHz
• Signal-to-noise ratio: >100 dB
• Equalisation: Bass ±12 dB at 100 Hz, treble ±12 dB at 10 kHz
• Filters: Fixed 70 Hz low-cut, switchable 120 Hz high-pass
• VOX-Ducking: 0 dB – 45 dB
• Priority functions: EMG input
• Contact override with 2-tone chime for attention-grabbing alerts
• Remote power (ON/OFF Stand by): 2-pin, Eurostyle, contact closure
• Switching mode power supply (µPC controlled) Mains over/under voltage protection, inrush current limiter, mains over current, high temperature
• Status indicators: Protect, Peak, Signal, Call, Power
• DIP switch
• Connections: 3-pin XLR, 5-pin Euroblock, 2-pin Euroblock, 4-pin Euroblock, RCA
• Moutning: Stand-alone, 19-inch rack, side-by-side rack mounting, 9.5-inch half-rack, desktop mounting, under-desk mounting
• Dimensions (W x D x H): 442 x 218 x 45 mm
• Weight: 2.53 kg
• Colour: Black
• Included brackets facilitate both single and dual rack-mount configurations, while desktop and under-counter installations are equally viable