Ir al contenido de la página

Lámpara de Pie LED Asimétrica

  • Fuente de luz: 18 LEDs RGBMA de180 W
  • Mezcla de colores: RGBMA (Rojo, verde, azul, menta, ámbar)
  • Temperatura de color ajustable de forma continua de 2400 a 8500 K
  • Flujo luminoso: 6300 lm
  • Índice de reproducción cromática (CRI): CRI 96,5, TLCI 88
  • Ángulo del haz: 25º x 75º (haz), 80º x 125º (campo) / con filtro: 40° x 90° (haz), 85° x 160° (campo)
  • Pantalla: LCD, 8 dígitos, 2 líneas, con tapa
  • Obturador electrónico/Estroboscopio con 1 -18 destellos por segundo
  • Macros
  • Regulador de intensidad lineal de 0 - 100% a 8/16 bits
  • 7 modos de atenuación
  • 4 curvas de atenuación
  • Control de temperatura de color calibrado
  • Ajuste de verde
  • Modos de emulación CMY y RGB
  • Función de seguridad EdgeLight
  • Programación autónoma
  • Hasta 4 zonas LED
  • Alineación magnética de múltiples unidades
  • Consumo de corriente: 0,85 A a 230 V
  • Consumo de corriente: 196 W
  • Voltaje de alimentación: 100 - 240 V AC, 50 / 60 Hz
  • Controles: DMX 512-A (RDM), ArtNet, sACN
  • 13 modos DMX con 1 / 4 / 4 / 4 / 11 / 12 / 13 / 16 / 19 / 20 / 31 / 32 / 56 canales
  • Clasificación de protección: IP20
  • Conexión: XLR de 5 pines y 2 conectores etherCON RJ45 hembra
  • Entrada/Salida Power Twist TR1
  • Material de la carcasa: Aluminio fundido a presión y chapa de acero
  • Pies ajustables
  • Color de la carcasa: Negro
  • Dimensiones (largo x ancho x alto): 962 x 206 x 85 mm
  • Peso: 7,3 kg
  • Incluye 2 soportes Omega, 1 filtro "Frost" y 1 visera
  • Disponible desde Septiembre 2026
  • número de artículo 653020
  • Precio por 1 Unidad(es)
  • Tipo de construcción Cyclorama
  • Mezcla de colores RGBAM
  • Tipo de LED x-en-1
  • Con soporte para suelo Sí
  • Sin ventilador Sí
  • Controlo remoto no soportado
  • DMX inalámbrico No
  • Color de la carcasa Negro
  • Mezcla de color RGBAL
  • Tipo LED x-in-1
  • Control Remoto No soportado
  • Longitud 0,96 m
1.999 €
Todos los precios incluyen IVA
Disponible en breve (normalmente 2-5 días)
1

1 Valoraciones de los clientes

5 / 5

Emisión de luz

Fabricación

1 Reseña

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
EE
Astonishing evenly-applied wash colour
ESP Event Management 23.09.2026
We run four of these for medical congress work and the headline for me is that there is genuinely no fan inside the housing — it's silent by construction, not by a quiet mode you switch to, which matters enormously when there are open lectern mics a few metres away. The asymmetric optic does exactly what it's supposed to: set it about a metre off the wall and it lifts a 6 m cyc evenly from top to bottom, with no hotspot at the base and no falloff at the top that you end up chasing in the desk. Colour is the real surprise at this price — it holds up on camera without correction and the spill stays clean on skin tones. At approx. 7 kg and under a metre long it's easy to handle solo, and at 180 W you can link several units on one 240 V circuit through the TRUE1 in/out, which saves a serious amount of distro on a long cyc. It takes Art-Net and sACN on its own RJ45 in and out (I haven't tested them yet), so you can feed it straight off the network without a node, and there's a four-zone pixel mode if you want segments rather than a flat wash. One tip from use: drive it on the calibrated CCT presets rather than raw RGB at full.
Emisión de luz
Fabricación
0
0
Reportar evaluación

Reportar evaluación