Ir al contenido de la página

Estuche para Mezclador de DJ

  • Adecuado para Pioneer DJM V10
  • Estuche completamente negro con contrachapado multiplex de 6 mm revestido en negro
  • Conducto para cables detrás del dispositivo
  • Tapa desmontable
  • El dispositivo puede permanecer en el estuche durante el funcionamiento
  • Un asa negra
  • Cuatro cierres de mariposa empotrados negros
  • Esquinas de bola redondeadas negras
  • Perfiles de aluminio resistentes negros
  • Interior con EVA
  • Dimensiones exteriores (ancho x profundo x alto): 522 x 576 x 230 mm
  • Dimensiones interiores (ancho x profundo x alto): 438 x 453 x 92 mm
  • Color: Negro
  • Peso: 9,8 kg
  • Disponible desde Noviembre 2024
  • número de artículo 571643
  • Precio por 1 Unidad(es)
  • Bandeja para portatil No
  • Color Negro
  • Anchura interior 438 mm
  • Profundidad interna 453 mm
  • Altura interna 92 mm
  • Peso 9,8 kg
128 €
Todos los precios incluyen IVA
Disponible dentro de 3-4 semanas
1

2 Valoraciones de los clientes

4.5 / 5

Manipulación

Fabricación

1 Reseña

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
g
Solid Flightcase, would recommend.
gravye 22.02.2026
There aren't many DJM V10 flightcases around. Pros for this one are that it's cheap, has plenty of thick EVA foam for protection and a lid that lifts up, rather than a hinged lid (although, you may prefer a hinged lid). You should not use your V10 in this flightcase. I previously returned a magma flight case which had ventilation cutouts, and it melted the glue holding the EVA foam in the flightcase in a 25C room. This does not have ventilation cutouts in the bottom and the V10 is already huge, so I would recommend always removing it from the case, but as mentioned, this is true even for those with ventilation slots, as the V10 ventilates through the side vents rather than the rear, as the IO side is far too packed. There is no flightcase currently available which provides proper ventilation to the V10. The cable cutout at the back is large enough to easily fit your IEC and other cables. The case is sturdier than you would think for the price. The black metal sections are painted, so they will scratch and show up silver as the case wears. This is true for any case that isn't anodised, of which there are none.
Manipulación
Fabricación
0
0
Reportar evaluación

Reportar evaluación