IK Multimedia ARC Studio+ Upgrade

Standalone frequency response correction for stereo monitoring systems without a measurement microphone

• Room correction independent of DAW or speakers
• Simple creation of correction profiles
• ARC X Room Correction Engine
• Two calibration methods: Computer-free single-point calibration carried out directly on the device, or computer-assisted multi-point measurement using ARC X with 1, 3, 7 or 21 measurement positions
• Integrated subwoofer management
• Automatic subwoofer detection
• Automatic calibration of the subwoofer and monitors in terms of phase, level and crossover frequency
• 3 presets can be stored in the unit, including a calibration profile, speaker configuration, subwoofer status and input source for each preset
• Presets can be accessed directly via the controls on the front of the unit
• Upper and lower frequency correction limits can be adjusted
• X-Monitor: virtual monitor profiles for over 20 models (ARC Studio must remain connected via USB-C)
• High-quality 32-bit AD/DA conversion at up to 192 kHz, with a dynamic range of 120 dB
• Frequency range: 2 Hz to 87 kHz (-2 dB)
• Latency in natural phase mode: 1.4 ms
• Latency in linear-phase mode: 42 ms
• Relay Hard-Bypass
• Maximum input level: +18 dBu
• Maximum output level: +18 dBu
• 2 inputs: Balanced XLR/TRS combo sockets
• Microphone input for ARC MEMS measurement microphone (not included): XLR
• 2 balanced outputs: XLR
• Balanced subwoofer output: Mono TRS jack
• USB-C digital input
• Optical S/PDIF input and output
• Dimensions: 197 x 122 x 44 mm
• Weight: 0.63 kg
• Includes a USB-C to USB-A cable and power supply unit