MA Lighting grandMA3 2Port Node PoE

2Port Node

• Converts network data to DMX
• PoE variant (Power over Ethernet)
• Synchronised output of two DMX universes
• Remotely configurable via any grandMA3 console or onPC workstation
• All grandMA3 xPort Nodes (with the exception of the DIN-Rail versions) are also available as onPC versions, which can be used to activate parameters for onPC workstations
• MA-Net3, MANet2, sACN and Art-Net compatible
• Fully RDM compatible
• 3.9" colour display on the front enables simple configuration and provides a quick overview
• To ensure highly reliable and stable data exchange, all grandMA3 xPort Nodes are equipped with a powerful processor and a 1,000Mbit/s network interface

Technical Data:

• Parameter: None
• Parameter Mode2: none
• 1 Power Twist TR1
• 1 x etherCON/RJ45
• 2x DMX512-A Out (5-pin XLR female)
• 1 x USB 2.0 (Type A)
• Supply voltage: 100-240 V / 50/60 Hz / PoE (power over ethernet) (IEEE 802.3af; 48 V DC/max. 12 W)
• Power: max. 15 VA
• Dimensions: (W x D x H): 207 x 184 x 43 mm
• Weight: approx. 2 kg

Note: Please note that this node is only an extension for existing MA3 systems.

This node alone does not activate any DMX channels in the software.

An MA3 console or an ON PC Node (e.g. Art.469458) is always required for operation