TonePros TPFR C Tune-O-Matic Roller

Compré este puente para una SG epiphone (sin trémolos ni bigsby) y la verdad es que estoy muy contento, no tuve que cambiar ni los casquillos que van incrustados en la guitarra, se integra perfecto, de hecho tengo un par de les pauls chinas que las voy a mejorar con este puente. Algunos dicen que mejora el sustain, yo no lo noto ni mejor ni peor, la principal causa por la que uso estos puentes es que es más difícil que la cuerda pete por el puente.

I put this TonePros TPFR C on my Sire L7 and was quite surprised by the improvement in tone. The strings ring better and the guitar feels more responsive … somewhat like when you put new strings on. It sounds like the harmonics are coming through more. Very nice, especially if you play clean.
It wasn’t a simple drop-in replacement though. It would only go on by loosening the bridge posts to provide enough give to push the roller bridge on, then screwing them back in. Making it very tight - which is probably a good thing for tone. The next problem was the rollers are very slightly higher than regular saddles. So on the Sire I couldn’t get the action low enough before the knurled flanges on the posts hit the top flange of the inserts. I had to grind some of the flange away and take some material off the bottom of the bridge where it sits on the post flange.
Overall though am delighted with it … I would definitely recommend you get one for your best/favourite guitar.